Gary Jackson: Fire When Ready Pottery
A Chicago potter’s somewhat slanted view of clay & play
Categories: flowers, soda-fired, stamped, vases

Sometimes a single white rose can be the perfect centerpiece in a nice ikebana vase.

Categories: mugs, soda-fired, stamped

Another Monday. Another mug.
Happy Mugshot Monday!

Categories: kiln firing, pottery, soda-fired

Early morning peek into the soda kiln. Looks good so far. Took out the top rows of brick to help with cooling. Unloading this evening… with everything heading to ART IN THE BARN this weekend in Barrington.

Categories: mugs, soda-fired, stamped

Happy Mugshot Monday everyone!

Categories: classes, kiln firing, soda-fired

THE BIG REVEAL.
A quick peek into the top as we started to unbrick reveals a well-melted cone pack.
Cone 10 just a bit flatter than I would normally go for, but it took our class a bit longer to get all of the soda mixture into the kiln. Oh well… still a beautiful kiln full.

After the door bricks were removed, the Soda Workshop Team started unloading their kiln. Piece by piece. Shelf by shelf. Post by post. Trying my best to limit the ooh-ing & aahhh-ing until later. I thought it would be best if we got all of the pots unloaded into one of the classrooms… and then clean the kiln, scrape the shelves and kiln wash before we start to admire their treasures! I was afraid that if we started the admiration process, I may never get them back into the kiln room to do the “ugly” part of the process.

 

A quick shot of the back stack before it was unloaded.

One casualty… it was a large, flat oval casserole. It was liner glazed with Reitz Green and nothing outside. Rachel wasn’t too upset as it is all part of the learning curve. But she also couldn’t help herself with camera is at the ready!

It was such a “perfect” crack that we think it might have been a bad glaze fit. With the inside lined with glaze, and nothing on the outside, the shrinkage differential may have been too much for the low, flat oval casserole. The cracks were right through the walls of the pot… nowhere near the construction points as you might expect.

As their soda-fired pots began to pile up, it was tough to stop the admiration! So many beautiful pots. So many new things to learn. So many excited Soda Workshop peeps!!!

All too soon, it was back to the “ugly” part of the process. They scraped the shelves down and then re-painted them with kiln wash. My very least favorite part of the entire process. I would much rather scrape than kiln wash!!!

So many shelves that they had to expand into the larger kiln room to spread the shelves out.

It was a long thee days. Yet never enough time to bequeath all of the soda-firing information. So much to share, so little time. I’m pretty sure the Soda-Firing Workshop students had a great time. Their pots turned out great… and now they have been bitten by the “soda” bug. Let the addiction begin…

 

Save

Categories: classes, glaze, kiln firing, process, soda-fired, workshop

After much discussion, I finally decided it was time to teach a Three-Day Soda-Firing Workshop. Many of my Tuessday night Advanced Beginners were looking for a little soda-firing experience. So we’re kicking off the Three-Day Workshop.

Day One – Friday : Glazing, wadding & loading.
Day Two – Saturday : Firing & potlucking
Day Three – Monday : Unloading, kiln cleaning & admiring of pots!!!

We started the evening with a discussion about glazing & wadding for the soda kiln. They had all come with a collection of bisqued pots… so they set about to glazing & wading. With LOTS of reminders to take good notes and keep track of what they’re doing so we can discuss the results after the firing.

Once everything was glazed & wadded, we moved pots into the kiln room. More discussions about the soda-firing process, air-flow patterns, reduction/oxidation… and other kiln loading basics like how to stack with shelves & posts.

 

Back stack done… time to move onto the front stack of two shelves. Lots of discussions amongst the workshop participants. Trying to determine which pots should go where, and figuring out how to get everyone’s pots into the kiln evenly and fairly.

After many-repeated conversations about soda-firing & kiln loading, the workshop participants finally got the kiln loaded.  I think they all have a new realization & appreciation for all the work our Monitors do with loading & firing all of the classroom kilns. For the first time, they had to load kilns themselves… instead of their work just “magically” getting fired. I think it was a LOT more work than they expected… but hopefully they’ll appreciate the process more when they get their finished pieces out of the kiln Monday night.

Excited to have the kiln loaded… and now on to bricking the door.
One-by-one… brick-by-brick…

So now it’s all closed up. Ready to go.
Firing begins early tomorrow morning to kick-off Day Two of the Soda-Firing Workshop.

Save

Save

Save

Save

Save

Save

Save

Save

Save

Categories: art fair, mugs, soda-fired, stamped

You know they’re my favorite thing to make.
If I could only make one shape for the rest of my pottery career it would definitely be MUGS!!! So here’s to another Mugshot Monday… and a quick reminder of the Evanston Lakeshore Arts Festival this weekend if you want to get a mug of your own!!!

Save

Save

Save

Save

Save

Categories: mugs, soda-fired, stamped

Celebrating MUGSHOT MONDAY with another stamped & soda-fired mug with some nice flashing & orange peel effects.

Categories: mugs, pottery, soda-fired, stamped

It’s the start of another week… which also means another Mugshot Monday!!!
And another week of Summer Camp. Whoo-hoo!!!

Categories: bowls, soda-fired, stamped

Quick pic of a soda-fired, class demo bowl that just came out of the kiln.
With an altered rim and stamps on one half of it… just ‘cuz.

Save