Last night I got a lot of glazing done. It was another late night, but I got most of the
“smaller” pieces glazed & wadded. Today I need to focus on the larger ones… and then
load the kiln for tomorrow’s soda firing! Looks like it’s going to be another long day…

Last

My bisque kiln from last night was still warmer than I would like.
So I decided to let to cool longer and dive into glazing some pieces from an earlier kiln!
I generally start by painting a lot of temoku glaze into all of the stamped impressions.

And then, once the glaze is dried, I take a moist sponge and wipe off the top surface
so that the temoku glaze stays inside the stamped impression – but not on the surface.
I love how the inlaid glaze really shows off the pattern of the stamp, instead of covering
& obliterating it with too much glaze!

But don’t think that they’re done. Oh no, I’ve got a lot of work to do on them first.
Liner glazes, sprayed accents, wadding, etc. So there’s still a lot to do… and even more
coming out of the bisque kiln tomorrow night. Not a lot of time to get everything done.
It’s my plan to load the soda kiln on Friday evening, and fire all day Saturday!

Tonight was my last chance to make some new pieces for this weekend’s soda kiln.
I have a bisque kiln scheduled for tomorrow… so I’ve got to get these done, slip painted,
dried and ready to go into the kiln quickly. So I decided that some more large textured
slab vases might be a good way to go. And here are some more textures on the slabs…
soon to become textured vases!

Getting ready for my next soda kiln… trying to make more, but quickly running out
of time! So tonight I loaded another bisque kiln for firing. Not really my “best work”
in filling a kiln… but sometimes you just need to get it loaded and get it done.
As the glazing portion needs to begin really soon!!!

Kiln Layer #1 -More bowls, mugs & ornaments!

Kiln Layer #2 -More bowls, mugs, tumblers & ornaments!

Kiln Layer #3 – Plates, gourd leaves, ornaments and some “filler” from Catherine Tweedie!

Kiln Layer #4 – More mugs, tumblers, ornaments & “filler” from Tweedie!!!

So, Friday night I spent some time reclaiming clay and incorporating it with some other,
stiffer clay. Then I threw a few pieces with that “new” clay. Well today I was back in the
studio trying to finish off everything I threw Friday night. First it was stamping & trimming….

Followed by adding some colored slip accents. The slips I used are special for firing
in the soda kiln atmosphere. They may look dull now, but once the soda hits them,
they will turn into saturated colors like orange & gold.

So you know how much I love “free” clay?! So tonight I went to make some new work…
but my bags of reclaim were a bit too wet & squishy. And new bag of soda clay I grabbed
was a bit too hard. What to do?… mix them together of course! Instead of power wedging”,
I find it a lot quicker & easier to layer the two. I start by piling up thin layers of each clay.
You can actually see the layers of the clay when I cut the pile in half.

After cutting, you take one half and slam it down on top of the other half. Press them down
together, slam if necessary, and cut in half again. Take one half and place it on top of the
other half. Press down and squish together again. Repeat. Every time you re-pile and squish,
the number of layers doubles. Thus making the layers thinner & thinner each time.

Cut in half. Restack. Press. Squish. Repeat…. and see how the layer are getting thinner???

After cutting & layering the clay several times, the two separate layers kind of disappeared
and were ready for some wedging to finish mixing the two. Not finished wedging… just some
quick wedging to mix it all up!!! And to start thinking about what I was going to make?

Once the clay was all incorporated, wedged and ready to go…
I cut up the clay into smaller chunks and wedged them into balls for throwing.

So I threw some more “replenishment” pieces… and threw.. and threw… and threw…

So now I’ve got to get them all stamped, slipped & trimmed…
and dried so they can make it into my next bisque kiln coming up VERY soon!!!

Working to fill another soda kiln…and as usual, I’m starting with my favorite: MUGS!!!
Last night I threw the cylinders, tonight I stamped them. Hopefully I will get them
trimmed, handled and slip painted tomorrow. Fingers crossed.

Tonight I painted on the colored slip accents onto the latest batch of ornaments.
The colors will change as they are fired in the soda kiln atmosphere creating some
beautiful flashing effects. But first… they need to dry, and be bisque fired.

It seems like I threw these ornaments SO long ago. I’ve been a little busy…
Lucky I have a good spray bottle and thick plastic… otherwise these would have
been way too dry to finish. But they’re finally all trimmed, stamped & capped.
Next I’ll add some color slip and start them drying.

It was a great day today at the RAVENSWOOD ARTWALK.
A lot of great people stopped by today to see our studios… and, even better,
I was very productive through the day. I finally finished detailing these votives!
Forty-four thrown… forty-four finished.

Stamped, pierced & slip painted. Now they need to dry and find a bisque kiln.