Back in the studio… replenishing he inventory… making more mugs!!!
After the pieces are thrown on the wheel, I allow them to dry partially so that they are
malleable, but not squishy. Once they are at the proper stiffness, I stamp the patterns
into the sides with my handmade stamps. After stamping, the bottoms of the pots
need to be finished to give them a more professional look.

I place the pieces back onto the wheel upside down and re-center them.
They are affixed to the wheel surface and then spun really fast. With a sharp trimming
tool, the clay is cut off the sides and bottom into thin ribbons of clay.

As the cylinder spins, and the ribbons of clay removed, you can finish off the bottom,
the sides and create a nice footring. The footring is the circle of clay that is left on
the bottom for your pot to stand on. This is your last chance to “finish off” the pot
before you let it begin to dry. Once dried… it’s off to the bisque kiln firing.

Tonight I opened up my soda kiln to finally see the treasures inside.
After a night of unbricking, unloading, grinding shelves, kiln washing shelves,
sweeping, mopping, packing, boxing, shlepping, and moving all of the work home…
it is now time to admire and start prepping everything for this weekend’s art fair!

Tonight I loaded the soda kiln with all my work for next weekend’s art fair.
Every piece is glazed & wadded – ready to go! Each shelf is placed, filled with pots
then ready to raise the next shelf on the brick posts. I love loading kilns.
It’s a three-dimensional puzzle trying to get as many piece into the kiln
without packing it to tight. If it’s too tight, the soda vapors will not travel through
the stack as well. So it’s a fine balance of keeping enough air space… while packing
it full so I “get my money worth” of the kiln fee!

And all the while packing pots… I’m covering every exposed surface of shelf
with as many small tiles as possible!!! Including that very last shelf I had to squeeze
in there at the very tip-top of the kiln!!! There’s never enough tiles…

Still getting ready for next weekend’s Art In The Barn… and tonight I was glazing!!!
I typically start by inlaying glaze into all of the stamps by filling them all
with glaze and then wiping off the top surface… allowing the glaze that is actually inside
the stamp to stay there. I find that it really helps accentuate the stamp pattern!

After the stamps have been inlaid & wiped, then they each get a liner glaze on the inside.
Some of them might even get a little accent color sprayed on the exterior… and then every
pot needs to be wadded before it can go into the soda kiln. Still have a long ways to go…

So I’m still working in the studio and  getting ready for Art in the Barn…
my last outdoor show of the summer – this time in Barrington!
Tonight I loaded my bisque kiln of freshly made pieces. Remember,
the bisque firing is the first firing that makes the work solid, yet porous.
The bisqued pieces are then glazed and fired on more time.

The beauty of the bisque firing is that you can pack the kiln pretty tightly.
Things can touch, things can stack… it’s a 3-D stacking puzzle to fill the kiln
effectively. And luckily… I’m pretty good at it if I do say so myself!!!

The first layer of my kiln was filled with mugs and soap dispensers…

A couple more layers, after stacking bricks & shelves, pots, more bricks & shelves…
then the kiln was finally topped-off with some tumblers, spoon rests and the large
textured slab vases that I made this past week. With two on their sides…

Luckily, everything fit… barely. My pieces are stacked right up to the top.
Just barely clearing the lid when it closes! So this kiln will fire for about 12 hours
tomorrow, then cool overnight and be unloaded Tuesday night. A couple days
to glaze & wad everything… then I load my soda kiln on Friday night and
fire all day Saturday!