Towards the end of yesterday’s LILLSTREET 3-DAY SODA-FIRING WORKSHOP, my students got the chance to load the soda mixture into the kiln. When the kiln gets up to cone 8, it’s time to mix it up and then start scooping & inserting the mixture into the kiln. I like to use a long angle iron to fill with the mixture – and then slide it into the kiln, dump it into the fire box, and then watch the flames shoot out!!! It’s a lot of work, but all part of the soda-firing process. I think they all enjoyed the experience. So now after several rounds of adding soda, the kiln has been turned off and it cooling all day today! They’ll return tomorrow night to open & unload the kiln… do some kiln cleaning & shelf maintenance… and then we’ll all get to look at their new soda-fired masterpieces!!!

Towards the end of the firing yesterday, the soda kiln is creeping into the cone 7-8-9 range… and the kiln is in full reduction at that point. Always exciting to see the flames shooting out everywhere!

Yesterday was the firing of our kiln for the LILLSTREET 3-DAY SODA-FIRING WORKSHOP. I started the kiln early in the morning… waiting for the pyrometric cones to start going down… and sometime around noon it was time to put the kiln into body reduction. Which is always fun because that’s kinda the first time you seem some flames peeking out of the kiln here & there!

So this weekend has been part of the LILLSTREET 3-DAY SODA-FIRING WORKSHOP. I have a great group of students with most of them firing their work in a soda kiln for the first time! There’s so much to learn & we’re just trying to squeeze it all in! Friday night we met up, talked soda, and then started glazing & wadding right away!

It was a very long night… since we also had to load the entire kiln & brick up the door. My group were “rock stars” with everyone pitching in… even as we went well past the “posted” end time! They all had a great time, worked really hard & soaked in as much as they possibly could! We got ALL of their work into the kiln… so I’m hoping they each get a bunch of beauties out when we unload Monday night!

A little more fun this week making some cone packs for upcoming firings.

The pyrometric cones are designed to melt at different temperatures. So this little pack of six cones will take us all the way through the soda firing… indicating certain kiln firing modifications along the way. During the firing, you pull out a brick and peek into the kiln to see the cones… watching their melting progress. When the final cone… cone 10… melts over halfway down your kiln is done!! Very high-tech, right???

This week has been crazy busy with teaching class & preparing for my Lillstreet 3-Day Soda-Firing Workshop this weekend… and getting some new stuff ready for “4×4 : FOUR MAKERS” for next weekend. So I’ve spent a bit of time adding some inlaid glaze to these highly textured pieces.

There is already some colored flashing slip accent in the stamped areas… but I wanted the impressions to be highlighted too. So I’ve added some tenmoku glaze into them & gently wiped it off the top surface to reveal some more contrast that I’m hoping the soda kiln will love!!!

So I’ve been glazing the latest batch of “hybrid mugs” in preparation for this weekends Soda-Firing Workshop. A simple liner glaze of tenmoku… and then I had to decide which ones to leave raw outside, and which ones need a bit more lovin’ & a bit more colored glaze accents before soda-firing.

For those of you who have never been to my condo…
a quick glimpse inside while celebrating NATIONAL TILE DAY with a few shots of a tiled wall I made several years ago! All handmade, textured & soda-fired tiles filling the wall from floor to ceiling… from bedroom to bathroom.

Another large serving platter… stamped & textured using two simple tools. Each stamped impression pressed in one-by-one… by one… by one… by one… just “a couple” impressions to fill it in all the way around the platter!

Little textures. Lots of glazing. And a BIG plan coming together… I just hope it comes even close to how I imagine it in my head?!