This week in my SURFACE DECORATIONS class, we tackled a couple different techniques for a fun tie-dyed effect… you all know I’m a kinda big fan of tie-dye!!!

So we started with a “squiggly” version… where I took a large plat platter, painted a layer of thick slip on top, and then dribbled some blobs of colored underglazes on top of it. Not really sure how this will work… but I’m always ready to try something new… it’s just clay, right?!

And then I took a plastic rib with a scalloped edge… a cake decorating tool… and started to squiggle through the layers of slip & underglazes to blend, blur & texture the plate. In hindsight, I kinda wish the plastic rib were either softer or thinner… as it was a bit tough to get some good squiggle up by the curve of the rim.

So here it is so far… I’m going to let it dry slowly and trim the bottom when it gets leatherhard. Still contemplating if it might “need” a bit of stamped texture somewhere?! And if so… where???

After bisque firing, I’m assumiong I’ll probably just sue some clear glaze to make the colors “pop” and give it all some shine. The downside might be… that I’m not fully confident that the colors of the underglazes will actually “survive” the high-fire cone 10 temperatures. But we’ll find out soon enough…

Not quite traditional “tie-dye”…. but pretty fun & groovy nonetheless!

Nothing better on a damp & rainy day… than to play in the studio, getting ready to stamp some more flower pots… and binge watching the start of THE GREAT POTTERY THROW DOWN on HBOMax. Giddy-up!!!

After Tuesday’s “bowls-on-purpose” class demo, I kinda felt they still needed a little somethin’-somethin’!!! So today I did a bit of stamping, detailing & trimming! Making these bowls even more “not-so-basic”!!!

Last week in one of my pottery classes, we tackled some surface decoration using thick white slip for textures & patterns. Sure, I could have used colored slip… but I’m more intrigued by how the glazes might play well with these cool textures & grooves!

One of the “benefits” of being stuck in my studio all day yesterday while firing the soda kiln… is being able to get a lot of side odd projects done. Like turning out my latest batch of reclaimed clay… now sitting on a large plaster bat drying up until it’s good to wedge up and start over with some new “free” clay!!!

Finally finished stacking the kiln! Shelf by shelf. Post by post. Pot by pot. Tried to make some good choices as to which pot goes where for the best soda effects… in terms of air flow during the firing, as well as factors like clay type, glazed or not glazed, colored slips, etc. Hoping that the right pots in the right places will work out for the best in this firing tomorrow!!!

LOTS OF POTS!!!
Tons of mugs and so much more! All glazed, wadded & ready for a trip downstairs on the rickety Lillstreet freight elevator! Hence the masking tape “seat belts” so nothing hops off along the way!

Time to get some glaze going… luckily, I’m getting ready for a soda kiln firing, so it’s more about liner glazes, inlays & accents… and not fully glazing things. So it “might” go a little quicker?… but everything needs to be wadded too, so maybe not so much?!

When you’re in the final “mad-dash” preparing for this weekend’s soda kiln… you need that last bit of bisque… and you couldn’t quite fit it all in one kiln?!!! Okay, so maybe that “one last bit” was bigger than I expected… did I make to much?! Time to get to glazing… and we’ll find out!!!

Just loading a last-minute bisque kiln…just under the wire… as I will soon have a LOT Of glazing & wadding to do if I”m still planning on loading the soda kiln on Friday night. Maybe I can focus on getting my taxes finished while this kiln fires & cools??? Fingers crossed… ugh.

Layer One –

Layer Two –

Layer Three –

Layer Four –