Well, I just added the last batch of soda mixture into my kiln.
Very hot. Lots of flames – so much fun! Not for the weak of heart.
The soda mixture is introduced on a long angle iron through a brick over the fire box.
The filled angle iron goes in and gets dumped into the fire box.
Instant combustion. Instant vapors. Instant flames shooting out all over the place!
Luckily, tonight I only burned off a few arm hairs.

Once the angle iron is removed, the “peep” brick gets put back in to keep the soda vapors
“trapped” and moving around inside – hitting all the pots inside building up a beautiful surface!

In case you’re wondering, my soda mixture is a combination of soda ash, soda bicarbonate,
whiting and wood chips. Mixed with a little bit of water to create a lumpy, oatmealy texture.

So now it’s just a waiting game for the kiln to get back up to top temperature
and for a little extra “soak” to get some more soda effects on the pots inside!
And now for the tough part… the kiln cools all day tomorrow, and won’t be unloaded
until Monday night! Gotta wait… stay tuned for pictures!

After three days of glazing & wadding, I finally loaded my kiln tonight.
And it might be my tightest packed kiln yet?! So now it’s time for a couple hours
of sleep, a quick shower and then it’s pack to the studio to get the firing started!

But first… a few photos…
Here’s my studio cart filled to the brim with glazed & wadded pots.
Thanks again to my Dad for making me a wonderful cart that works so well.

And here’s the Lillstreet soda kiln empty… just waiting to be filled up!

After about an hour of loading, the back stack was finished. I have a lot of work, and wanted
to get the most bang for my buck, so I packed the kiln pretty darn tight. Barely any kiln shelf
is showing as every surface has a pot or a tile covering it! I’m pretty pleased with myself…
notice how close to the arch my tall textured slab vases fit right in there!!! Sweet…

Part way through the front stack, I realized I didn’t have quite enough large pieces glazed.
So I went back up to my studio to glaze a couple more oval casseroles and a few serving
bowls. Then it was back down to finish off the loading!

I always find the front stack (of two shelves deep) to be a little tougher than the back stack.
I think it’s because the back stack is smaller and earlier on… so you still have a lot of sizes
to choose from and feel like you have a LOT of room to fill still. When you get to the front
stack, reality starts to set in and you start to realize you might not be able to squeeze
everything in?! Along the way, you start to get creative. I decided to split the two-shelves
into two separate stacks. And when I got to very end, I ran out of tall pieces, so I “floated”
a kiln shelf instead of leaving any dead air space at the top.

So, close to five hours later, my kiln was loaded… at long last.

Another rainy morning as I head back to the studio
Again, no sunrise bike ride today.

But I did get to see a beautiful glimmer from the droplets of rain sitting on some
hosta leaves in the back yard! I’ll take a little natural beauty wherever I can find it!

Another late night of glazing at the studio.
I got a lot done, and yet somehow there still seems to be a lot more to do?!
Back again tomorrow for a full day in the studio and the final push…
more glazing, wadding & loading the kiln tomorrow.
No rest for the weary… gotta get it done!!!

Tonight’s glazing marathon was quite productive…
and yet I’m expecting another even longer marathon tomorrow night!
Still a lot of bisque waiting on my shelves?!!! So much to do still…